Get a Complete Idea All about Lock and Lock Picks

Whenever they go out, most people carry five to 10 keys with them. You might have a few for the office or a friend's house, one or two more for the car and several keys for the house on your key ring. Of just how ubiquitous lock technology is your key ring is a clear demonstration: Dozens of times every week you probably interact with locks.

Locks provide us with a sense of security and that is why we use locks like the CompX Chicago Lock everywhere. But sometimes using only a couple of paper clips burglars, detectives and spies can open a lock very easily in movies on television.

With many innovative design variations Locks come in all sizes and shapes. By examining one simple, representative lock, you can get a clear idea of the process of lock picking. On fairly similar concepts, most locks are based.

You might find on a front door that the most familiar lock is the standard dead-bolt lock for most of us. It can be extended out the side as a movable latch or bolt is embedded in the door so in a normal deadbolt lock. With a notch in the frame this bolt is lined up.

The door can't move as the bolt extends into the notch in the frame when you turn the lock. The door moves freely when you retract the bolt.

Making it difficult for someone without a key to move it but simple for someone with a key to move the bolt is a deadbolt lock's only job.

Lock Picking

Materials

Lock Pick: You can use a paper-clip or safety pin bent at 90 degrees at the tip and straightened out. Basically something that can push up the pins and is thin enough to go in. The HPC Lock Picks are quite in demand.

Tension Wrench: Something strong enough to turn the cylinder but also thin/small enough to fit in the end of the keyhole. If you need to, you can use something like a small filed down wrench or a thin flat head screwdriver.